Settled Fe Probe Coating Thickness Gauge Film Thickness Tester
Settled Fe Probe And Plastic Shell Coating Thickness Gauge With Switch off automatically or manually
Functions & Features
● High quality metal probes.
● Two measuring methods:continuous and single;
● Two working mode: direct and batch;
● Limit setting function.
● Switch off automatically or manually.
Measuring Materials
Magnetic Induction (Fe): Measuring the thickness of Non-magnetic coating on magnetic metal substrate,
such as aluminum, chromium, copper, zinc, rubber, paint on the base of steel, iron, alloy and magnetic
steel
Technical Parameters
| Technical Parameters |
| Model No. | Leeb250A |
| Measuring principle | Fe |
| Measuring range (µm) | 0~1250μm |
| Probe | Settled |
| Shell | Plastic |
| Accuracy | ±(1~3%H+1) μm; H refers to the thickness of testing piece |
| Minimum resolution (µm) | 0.1μm |
| Min curvature of the min area (mm) | Convex1.5 Concave9 |
| Diameter of the min area (mm) | Φ7 |
| Critical thickness of substrate (mm) | 0.5 |
| Memory | 200 groups measured data |
| Dimensions | 115*55*23mm |
| Power supply | AAA Alkaline battery |
| Standard Configuration | Main unit,5 calibration specimens (48.5μm,99.8μm,249μm,513μm 1024μm),1 probe & substrate |
| Optional Accessories | Probes,Specimens,1 leather sheath |
Troubleshooting
The following error information table to tell you how to identify and troubleshoot:
| Error code | Implications of error code | The cause and solution |
| E02 | Probe or instrument damage | Repair probe or instrument |
| E03 | Probe or instrument damage | Repair probe or instrument |
| E04 | Measured values occur large fluctuations (For example when soft layer measurements); Magnetic field effect | When the measure menton the softcover, auxiliary device to measure should be adopted;Stay away from the strong magnetic field environment |
| E05 | Too close to the probe from the metal substrate when the phone is switched on | Probe from the metal substrate |
| E08 | Probe or instrument damage | Repair probe or instrument |
| E11 | Probe model in conformity with this group of the original data corresponding to the probe model | Replace the suitable probe Choose an unused group units Delete after calibration again |
| E15 | Zero deviation is too big, can not be zero | Select the appropriate substrate or repair equipment |
| E20 | This set of unit for calibration value | Choose an unused group unit Or delete after calibration again |
High quality Equipment Box:
Product Tags:
|
|
Settled Fe Probe Coating Thickness Gauge Film Thickness Tester Images
|
